 |
|
Message Board
|
|
 |  | |
 |  | |
 |  | |
 | ||
|
|||||||
| NJFishing.com Boating Use this board to discuss anything related to boats and boating in NJ |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
03-21-2017, 10:33 PM
|
|||
|
|||
Fuel/Water Separator Filter
Been changing my Yamaha 10 micron fuel/water separator filter (in my boat) the past two seasons myself and usually refill the new filter with gas before i screw it on. I've recently been told that I do not need to refill the new filter with gas before screwing on, since my 2014 Yamaha F150 is fuel-injected. Anyone know if this is correct? Any info/experience with this is greatly appreciated and thanks very much in advance!
__________________
Tight Lines and Screamin' Drags! 2014 Sea Hunt Triton 210 CC Club CRE Member: Catch, Release, Exaggerate  The difference between genius and stupidity? Genius has it's limits. TYMADRIP 
|
|
#3
03-22-2017, 11:05 AM
|
||||
|
||||
|
Re: Fuel/Water Separator Filter
With a fuel pump it will keep sucking the line. First bleed out the air and then siphon fuel.
You filling the separator does the work for it. Usually that's not a big deal. As was pointed out, the siphon ball will fill it for you if you left it empty. I guess it's semantics... you must not fill it... versus you don't HAVE to fill it. But in the end, someone has to fill it. Motors need fuel not air. I always fill mine.
__________________
Capt. Debs Tow boat captain/salvor 50 ton USCG Master NJ Boating College- Lead Instructor Big time hottie crabber 
|
|
#4
03-25-2017, 08:32 AM
|
|||
|
|||
|
Re: Fuel/Water Separator Filter
I fill every one. Easier on your hands. It can air lock and be very difficult to fill if installed empty.
__________________
Capt. Matt Kliminski USCG Licensed Maritime Skiff 20 Pioneer Pilothouse Honda 90 Maritime Skiff 14 "Junior" Johnson 40 SOLD MirrorCraft 16 Tin Northport Troller Johnson 25
|
|
|
|
Hybrid Mode
