What is your favorite penetrating oil?

[dogfish246]

So what is your favorite penetrating fluid any which ones have you tried? I just made a video on a homemade penetrating fluid that I have found to work the best so I wanted to share. Stuck bolts and breaking bolts is the worst but I havent had any problems since using this!

Let me know what you think! And if you have tried this before! I am always down to try new recipes people have!
**Also, if the video was helpful, give it a “thumbs up” on YouTube (it helps me out, thanks)***

https://www.youtube.com/watch?v=2WuVBFTzoKc&lc

[Duffman]

Originally Posted by dogfish246

So what is your favorite penetrating fluid any which ones have you tried?

Straight brake fluid. Nothing out there works better.

[RWole]

PB Blaster works great

[Fishin Dude]

I've used the ATF/Acetone mix myself before, works great.

[Gerry Zagorski]

I'm with Duff on the break fluid.... If you have a pair of old plyers that are hard to open and close due to corrosion, soak them in break fluid... Also had a set of sockets and wrenches on the boat that rusted all up.... Got a rag soaked it in break fluid , wiped everything down and they are almost as good as new.

[shrimpman steve]

My favorite penetrating oil?

KY

[fin_s_guy]

Originally Posted by shrimpman steve

My favorite penetrating oil?

KY

We know Steve.....we know.

Not that there's anything wrong with that!

[PAFireGuy]

I tried the brake fluid and ATF mixture on a hydraulic cylinder that would not come apart. We left it soak over the weekend and on Monday morning we were able to disassemble the cylinder by hand.
Thanks for the information.

[wrktoomuch]

Originally Posted by shrimpman steve

My favorite penetrating oil?

KY

Good one.

[Dupes]

I agree on the PB Blaster.