Best setup to fish for Stripers

[PaBeerGuy]

What is the best way to get set up for fishing stripers with plugs and jigs, or are they 2 different setups? Would like to just take 1 rod with me, should I go conventional or spinning? And what is the best way to tie the plug or jig onto the line? I have most of my reels set up with braid in the 50 lb range. Do I need about a 100' of 30lb mono on top?

[Tommyg17]

Take 1 rod 12-25 or 15-30 lbs, jump on one of the party boats and the mate will rig you up, and you can learn from them. Other fisherman aboard will be happy to help you as well.Convention or spinning is your choice.

As for your reel, IMO 30lb power pro backed with mono is a good choice, any tackle shop will be able to do this for you

Good luck

[PaBeerGuy]

Originally Posted by Tommyg17

Take 1 rod 12-25 or 15-30 lbs, jump on one of the party boats and the mate will rig you up, and you can learn from them. Other fisherman aboard will be happy to help you as well.Convention or spinning is your choice.

As for your reel, IMO 30lb power pro backed with mono is a good choice, any tackle shop will be able to do this for you

Good luck

not backing, you mean mono on top, right?

[tropics]

email sent Dan

[Gerry Zagorski]

I like braid when anchored and clamming or chunking since it helps you detect bites.. This time of year when the fish are a little more sluggish it helps alot. When the season wears on and you are live lining bunker and the fish are hiting hard, I think mono is a better choice. Lost way too many fish using braid. Not enough stretch.

For casting and jigging I perfer a spinning rod since they are much easier to cast and you don't have to worry about birds nests. Other then that I use conventional reels.

If you want to cover all your basis with one reel, I would go with a Shimano Spinner Bait Runner set up since you can use it for all sorts of fishing. The bait runner feature is what makes these reels so versital since you can control the line out tension like you can with a conventional reel yet you have the ease of casting with a spinning reel.

[hammer4reel]

Originally Posted by Gerry Zagorski

I like braid when anchored and clamming or chunking since it helps you detect bites.. This time of year when the fish are a little more sluggish it helps alot. When the season wears on and you are live lining bunker and the fish are hiting hard, I think mono is a better choice. Lost way too many fish using braid. Not enough stretch.

For casting and jigging I perfer a spinning rod since they are much easier to cast and you don't have to worry about birds nests. Other then that I use conventional reels.

If you want to cover all your basis with one reel, I would go with a Shimano Spinner Bait Runner set up since you can use it for all sorts of fishing. The bait runner feature is what makes these reels so versital since you can control the line out tension like you can with a conventional reel yet you have the ease of casting with a spinning reel.

couldnt disagree more !!.
Line type should not be just based on How your fishing as mch as what your fishing with rod wise.
live lining I like a glass or composite rod as I have broke way too many Graphite rods with both braid and mono on them on the hookset.

Braid performs VERY well , on those type rods. It offers a much better hook set than mono. and when your drag is set right you just work the fish until its in the boat.
For BIG bass alot less get away with braid than do mono.
And if snag and dropping bunker, braid well out performs mono doing that too.

Many new Baitcasters especially the new low profile work horses also can cast a mile and are pretty fool proof.

[GDubya07]

Originally Posted by tropics

email sent Dan

Listen too Richie - trust me on this one and I have no idea what he sent you

But Richie will never steer you wrong

GDubs

[ruger1v]

as previously mentioned. To cover a lot of applications I would suggest a Shimano Bait Runner also. I like the TFO rods for the price. Just be sure to find a nice sweet spot with the action. I like a bit more to the heavy side for snag and drop of bunker. I have 40# pp on mine. Friend has a giant spool so it was a freebie. Works great so far. Good luck.

[Tommyg17]

Originally Posted by PaBeerGuy

not backing, you mean mono on top, right?

the backing(mono) goes on first, then the braid, connected to the braid, i add 5 feet of flurocarbon tied with a double uni knot.