![]() |
![]() |
![]() | ![]() | |
![]() | ![]() | |
![]() | ![]() | |
![]() |
|
NJFishing.com Boating Use this board to discuss anything related to boats and boating in NJ |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]() I have a rotary teleflex steering setup that has full motor turn+ to starboard but about 60 percent to port at steering wheel lock. Do I have an issue with un equal cable length or can the travel be adjusted somehow?
Bueller....Bueller...Bueller.. Last edited by Blind Archer; 08-25-2016 at 10:44 PM.. |
#2
|
||||
|
||||
![]() the turn travel is mainly controlled off the length of the steering arm connector to the motor pivot. Some wheels have an adjustment underneath the rotary gearbox but it depends on which one you have. alot of them are not adjustable (the cheaper ones) take a look behind the wheel and see which model you have and post up the # and Ill point you in right direction
|
#3
|
|||
|
|||
![]() No model # or apparent adjustment feature. It appears to be original equipt. From 1981.
__________________
|
![]() |
Thread Tools | |
Display Modes | |
|
|