Fluid Bed?

[frugalfisherman]

How does this look?http://www.youtube.com/watch?feature...&v=1SrQzk2B22w

[Sharkyispy]

Good, just not the ideal set up for larger jigs, need to make longer tubes to accommodate.

[frugalfisherman]

Originally Posted by Sharkyispy

Good, just not the ideal set up for larger jigs, need to make longer tubes to accommodate.

I'm going to try and coat 1 pounders. How long should that top piece be? Maybe 3 inch pvc?

[makokeith]

There are better parts to use, especially the base, at lowes. But it is a great way to powder coat. I use three inch. Have used four. I have more than one hose going in the base of some also due to heavier powder.

[Sharkyispy]

Originally Posted by Sharkyispy

Good, just not the ideal set up for larger jigs, need to make longer tubes to accommodate.

Really dependent on size of jigs. If you're dipping that size, will need clearance around sides and enough depth to coat them properly/ completely. Properly built, will save you time and $$$ in supplies. Ensure your pump is strong enough to force the proper air flow, Install a flow valve for better control.