NJ Fishing Advertise Here at New Jersey's Number 1 Fishing Website!


Message Board


All around inshore rod/reel advice - NJFishing.com Your Best Online Source for Fishing Information in New Jersey


Message Board Registration       FAQ

Go Back   NJFishing.com Your Best Online Source for Fishing Information in New Jersey > NJFishing.com Bait and Tackle Talk
FAQ Members List Calendar Mark Forums Read

NJFishing.com Bait and Tackle Talk Use this board to talk about Bait and Tackle and see offers from our Bait and Tackle Sponsors

Reply
 
Thread Tools Display Modes
  #1  
Old 01-27-2013, 12:54 PM
nic350z nic350z is offline
NJFishing.com Member
 
Join Date: Mar 2011
Posts: 1
Default All around inshore rod/reel advice

I'm looking for an all around rod/reel setup for fluke, stripers, bluefish. I have always used spinning setups and want to make the switch over to conventional/bait casting. I want something with a level wind since this will be my first conventional reel and I figured it would be easier to get used to.

So far I am considering a Lamiglas 7030ct paired with either a Shimano Calcutta 400b or Abu Garcia Chrome Rocket. Lined with 50# power pro. I like the Avet SX from everything I have read but Avet doesn't make any level wind reels.

Any advice or recommendations would be greatly appreciated.

Thanks!
Reply With Quote
  #2  
Old 01-27-2013, 01:14 PM
HDMarc's Avatar
HDMarc HDMarc is offline
NJFishing.com Ambassador
 
Join Date: Feb 2012
Location: Brick
Posts: 826
Default Re: All around inshore rod/reel advice

I wouldn't suggest a level wind for saltwater use, but that's just me. I would suggest the Avet SX as it's a little powerhouse of a reel and can be used for everything you mentioned. You get used to leveling the line with your thumb real quickly. As far as a rod, you can try a Bogan Fish Poison rod. I have two of them and they're awesome rods for the money.
Reply With Quote
  #3  
Old 01-27-2013, 01:20 PM
stripbait stripbait is offline
NJFishing.com Ambassador
 
Join Date: Feb 2012
Location: ocean township
Posts: 102
Default Re: All around inshore rod/reel advice

i 2nd that awsome reel easy to use great rods by bogan cant go wrong
Reply With Quote
  #4  
Old 01-27-2013, 01:27 PM
stripbait stripbait is offline
NJFishing.com Ambassador
 
Join Date: Feb 2012
Location: ocean township
Posts: 102
Default Re: All around inshore rod/reel advice

leverwinds are ok but they do break with heavy loads the gear is ment to break so u dont lose a finger if caught inbetween if u blackfish alot leverwind ng just my 2 cents
Reply With Quote
  #5  
Old 01-28-2013, 09:42 AM
hartattack's Avatar
hartattack hartattack is offline
NJFishing.com Old Salt
 
Join Date: Mar 2008
Location: Old Bridge, NJ
Posts: 2,221
Default Re: All around inshore rod/reel advice

Daiwa Lexa 300 - levelwind, power handle, lefty if desired, 22 lbs of drag & weighs only 11 ounces. Bring it !!
Attached Thumbnails
Click image for larger version

Name:	lexa.jpg
Views:	735
Size:	6.0 KB
ID:	56211  
__________________
Once in a while you can get shown the light
In the strangest of places if you look at it right
Reply With Quote
  #6  
Old 01-28-2013, 09:56 AM
Sharkyispy's Avatar
Sharkyispy Sharkyispy is offline
NJFishing.com Old Salt
 
Join Date: Mar 2008
Location: Sarasota FL
Posts: 2,897
Default Re: All around inshore rod/reel advice

Paired my Avet SX with a Bogan custom rod. Great match. I Also have one paired up on a Tsunami rod(Heavier action).The AVET also has the Mechanical Cast or Magnetic control(depending on model) to help prevent back lash. Love the power the reel has when fighting a fish.
__________________
Mike Reynolds
[email]Sharkbite_Bucktails@aol.com
23' Parker Deep V
Supporter and Member of RFA/NJ
IGFA Member
www.sharkbite-bucktails.com
Reply With Quote
  #7  
Old 02-07-2013, 04:18 PM
LeftyReeler's Avatar
LeftyReeler LeftyReeler is offline
NJFishing.com Old Salt
 
Join Date: Mar 2008
Location: Red Bank
Posts: 1,517
Default Re: All around inshore rod/reel advice

Quote:
Originally Posted by hartattack
Daiwa Lexa 300 - levelwind, power handle, lefty if desired, 22 lbs of drag & weighs only 11 ounces. Bring it !!

Yeah then you see the price tag

The revo winch is a monster I have that one, used it for fluke bass and tog this year.. thing was literally a winch.

But also $$$$


The SX is perfect, or the BG Gold series from Diawa is nice too
__________________
SMALL BOX : LARGE SOLUTION
><>: ARHOMB :<><
Team Miller Light
Supporter SSFFF
Founder & President FGGF
Reply With Quote
  #8  
Old 01-28-2013, 12:45 PM
Leif's Avatar
Leif Leif is offline
NJFishing.com Old Salt
 
Join Date: Mar 2008
Location: Ocean Township
Posts: 3,759
Default Re: All around inshore rod/reel advice

Quote:
Originally Posted by nic350z
I'm looking for an all around rod/reel setup for fluke, stripers, bluefish. I have always used spinning setups and want to make the switch over to conventional/bait casting. I want something with a level wind since this will be my first conventional reel and I figured it would be easier to get used to.

So far I am considering a Lamiglas 7030ct paired with either a Shimano Calcutta 400b or Abu Garcia Chrome Rocket. Lined with 50# power pro. I like the Avet SX from everything I have read but Avet doesn't make any level wind reels.

Any advice or recommendations would be greatly appreciated.

Thanks!
I have to tell you that if it was me, I would be getting one of the Kevin Bogan rods. He has many that will fit the "all purpose" scenerio you are looking for. PLUS the rod will out-last any reel you purchase and be 100 times better than any factory rod out there with regards to components, hardware and workmanship. I have a few of his rods for many years and if you ever fished on any party boats you will be hard pressed not to find one in use by the mates, captains and customers.

I would also take Kevin's advice on the reels as well If you insist on the level wind. He has seen what works and holds up through the years.

I don't use any level winds with the exception of the penn 930 and 940.

I know you won't be disapointed if you deal with Kevin.

Good luck in your search!

Leif
Reply With Quote
  #9  
Old 01-28-2013, 01:07 PM
MrAC1980's Avatar
MrAC1980 MrAC1980 is offline
NJFishing.com Ambassador
 
Join Date: Sep 2011
Location: Wood-Ridge, NJ
Posts: 987
Default Re: All around inshore rod/reel advice

The Tekota's and Penn 310/320's are great cheap reels. If your budget is a little higher, the Penn Int 975LD is another great option but its pricey and its lever drag which another story. I also own the Daiwa Saltist 20 Levelwind which is a great tank of a reel for under $200 bucks, it does battle with the Avets in my opinion.
Reply With Quote
  #10  
Old 01-29-2013, 11:49 AM
JerseyCoast JerseyCoast is offline
NJFishing.com Ambassador
 
Join Date: Oct 2009
Location: Brick, NJ
Posts: 987
Default Re: All around inshore rod/reel advice

I wouldn't suggest a level wind for saltwater use either, because you will find the plastic/nylon worm gears are not strong enough for bigger fish, but if money is not that big of a deal, you can find a few that will hold up. Daiwa is a good choice when looking for a level wind.

As for the rod.... well..... that will depend on you and what YOU LIKE. There are different actions, lengths, and such that can be applied here and some may not fit you and your habits.

We have worked on a few rods that are "Utility Rods", ( 1 rod will do it all ). Our Jersey Jigger Rods are exactly that, built to replace a few rods, so you only need one. They are a slower action, nano composite rod blank, that will catch fluke and tuna up to 65-70#.

But, there are different actions and you may not like a slower action. I have found that going with a fast action may be good for one, but not the other. For example, a fast action for bucktailing is ideal most times, but if your dragging bait, you want a slower action, to avoid missed fish. Jope this makes sense????

What are you using now? What type of action? What length? What type of boats are you fishing on? How heavy is too heavy when it comes to fluke? (Do you fish 12oz? or stop at 6oz?)

If you can fill in a few blanks, I think we ALL can help you better.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:04 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.