First Conversion

[snapperbluefish101]

Well it took a little while, but I finally finished converting one of my Penn 4/0s.

It has:

1.Stainless Gear Sleeve

2.Pro Gear Power Handle- Black

3. Pro Gear Drag Star-Red

4. Carbontex Drags

5. Tiburon Topless Frame- Red

I think it is a nice start. I kept the Maganese-Bronze Main Gear, Penn Pinion Gear, and Bakelite sideplates in with this one. I installed the shims for the nuts of the rod clamp wrong, easy fix.

I am going to do another conversion of my other 4/0 too. This time it will be an Accurate conversion that is narrowed.

SNAPPERHEAD

[june181901]

I thought this was going to be about religion!

[Pete]

Nice job snapper. Good luck with it! The only thing I would have changed, if you don't already have it, would be a stainless steel yoke. Cool hot rod now.

[bunker dunker]

nice snapper,now we have to jig some tuna and cod to see if she works.
great job!!!!!

[Kevin Bogan]

Snapper, looks great! That's as custom as it gets.

[snapperbluefish101]

Originally Posted by bunker dunker

nice snapper,now we have to jig some tuna and cod to see if she works.
great job!!!!!

Thanks Ed. Cannot wait to use it for Cod!

SNAPPERHEAD

[Topeka Boy]

Great job Snapper looks great!! Good luck

[snapperbluefish101]

Originally Posted by Pete

Nice job snapper. Good luck with it! The only thing I would have changed, if you don't already have it, would be a stainless steel yoke. Cool hot rod now.

I forgot to mention it Pete, yes it does have the stainless yoke.

SNAPPERHEAD

[Garone Custom Rods]

Looks great. I just souped up my baja special with an upgraded knob and a custom one of a kind extended handle arm (thanks Fin-s!) Going to put it through the paces on some tiles in a few weeks.