Blank thru handle question

[tycomps]

Been slowly replacing my older freshwater rods with ones with the split eva foam grips because for me they cast farther, feel lighter, and seem to give me a better 'feel'. I was under the impression that the ones I've been buying have been 'blank thru handle' construction as that's how they appear. One has come loose inside the foam below the reel seat so it appears that it's a separate glued on piece. Is it safe to assume that unless specifically designated 'blank thru handle' the split grip rods are not?

[Jigman13]

What rod? You can usually find out real quick if it's through handle.

[MrAC1980]

Typically if the rod is sold as a "one piece" design then it should be as you say blank thru handle design. All rods/blanks are different.

[tycomps]

Originally Posted by MrAC1980

Typically if the rod is sold as a "one piece" design then it should be as you say blank thru handle design. All rods/blanks are different.

That's another reason I was surprised, I've been buying one piece 7' rods because I like the 'feel' transmitted to the handle and just assumed it was a solid blank.

[tycomps]

Originally Posted by Jigman13

What rod? You can usually find out real quick if it's through handle.

I've been testing 'budget' combo's for sh#ts and grins with a 100 dollar ceiling.

been combining daiwa rods 20-50 dollars with shimano/kastking reels 20-50.

the 20.00 daiwa is what came loose in the handle (crossfire series, doesn't state 'blank thru' in description)

http://www.daiwa.com/us/contents/rod...cfe/index.html