![]() |
![]() |
![]() | ![]() | |
![]() | ![]() | |
![]() | ![]() | |
![]() |
|
NJFishing.com Boating Use this board to discuss anything related to boats and boating in NJ |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]() Are the new volvo diesels any good?!?!?!? I hear a lot of bad things about them.
|
#2
|
||||
|
||||
![]() I had heard that parts in this area (SH) had been always been an issue. Not just recently.
Reputation WAS good engines. But hard to get parts locally.
__________________
Capt. Debs Tow boat captain/salvor 50 ton USCG Master NJ Boating College- Lead Instructor Big time hottie crabber ![]() |
#3
|
||||
|
||||
![]() I heard the same thing.
Not sure what horsepower your are looking for but I've heard good things about the Yanmars in the smaller horsepower engines.
__________________
Gerry Zagorski <>< Founder/Owner of NJFishing.com since 1997 Proud Supporter of Heroes on the Water NJFishing@aol.com Obsession 28 Carolina Classic Sandy Hook Area |
#4
|
||||
|
||||
![]() When I was in the market for a boat I asked the same question of a few people in the know, and they ALL told me to stay away. Parts are very hard to come by and are very expensive. In the SH area it is also very hard to find someone to work on them.
When I was looking there were a ton of boats in the tri state area with the Volvo's.... the only place that I could find the boat that I wanted with the Cummins were in Fla. I ended up making 5 trips to Fla looking at boats due to the fact that everyone told me to stay away from the Volvo's and these are guys that work on boats every day. |
#5
|
|||
|
|||
![]() Thanks guys!!
|
#6
|
|||
|
|||
![]() Not sure what model engine you are considering. Volvo D4 and D6 series engines have a reputation for being very reliable. These are common rail , electronically controlled engines, less smoke and less noise than mechanical diesels-like Yanmar and Cummins. Also they are fly by wire, so 2 control levers instead of 4, smaller harnesses too.
Parts are available online and at local marine stores in our area.(Lockwoods in Morgan) It is true that the parts are more expensive than Yanmar, Cummins etc. Loads of information on the topic at boatdiesel.com, which is where I did most of my research before deciding on a boat with D4 260s. |
#7
|
||||
|
||||
![]() When it's parts you be needing, it's a long way to Sweden !
![]()
__________________
Captain Rich Adler Tuna Wahoo Charters Riviera Beach Marina, Riviera Beach, Florida (609) 870- 4592 Last edited by Captain Rich; 12-21-2010 at 10:08 PM.. |
#8
|
|||
|
|||
![]() Fluker check your PM's
|
![]() |
Thread Tools | |
Display Modes | |
|
|