![]() |
![]() |
![]() | ![]() | |
![]() | ![]() | |
![]() | ![]() | |
![]() |
|
NJFishing.com Boating Use this board to discuss anything related to boats and boating in NJ |
![]() |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
![]() Haven't used my own boat in a few months, now the trim/tilt is stuck in up position, the release screw/valve will not move: had this problem when I got it a number of years ago... Anyone ever run into and happen to have any good tricks, she's still in her slip and it's a 97 Johnson 200 ocean runner...?
![]() |
#2
|
||||
|
||||
![]() When you hit the trim and tilt switch do you hear the trim pump running?
__________________
Gerry Zagorski <>< Founder/Owner of NJFishing.com since 1997 Proud Supporter of Heroes on the Water NJFishing@aol.com Obsession 28 Carolina Classic Sandy Hook Area |
#3
|
||||
|
||||
![]() My 98 200 Johnson wouldn't trim down over this past season intermittently, it turned out to be a bad wire on the limit switch. The engine would go up but not down, drove me nuts.
|
#4
|
||||
|
||||
![]() One good beer belly on the lower unit fixed it .... For now
![]() |
![]() |
|
|