![]() |
Sea Bass Teasers
Sea Bass Teaser
Here's a sea bass teaser that is easy to make and catches fish. You can make them in larger sizes for pollock and cod. I had great success with the 6/0 size in blue and pink for cod and pollock on a recent trip. Materials needed... Krinkle Hair Flashabou Mylar tinsel 4/0 Gamakatsu Siwash 100 lb swivel A thread or monochord Attach swivel to hook and close eye. (You can do this before or after you tie the fly.) 1. Put hook in vise and wrap first 1/3 with thread 2. Tie in a clump of tinsel and or flashabou on top of hook. 3. Tie in a bunch of krinkle hair on top. 4. Tie in a smaller bunch of darker color on top of that. 5. Rotate vise and tie in a clump of hair equall to what you did on top 6. Wip finish and cement the head. You can make these in any color. I use green, purple, pink and blue. Tie them so the hair extends past the bend but not too far as it will foul the hook. I tie them about 2 or 3 inches in length. A good tip is to cement the head as you go so the fly is durable. I use a deep penetrating head cement during each step and then epoxy the head for a nice finish. Use these with a teaser rig. I use 60lb test leader material. Tie a 150lb swivel to the 60lb test then tie in a 5 inch kiwi loop a few inches below that. Cut the leader 24-30 inches below that and tie on a 150 lb snap swivel or perfection loop for the jig or sinker. Good Luck! Leif http://i208.photobucket.com/albums/b...Picture846.jpg |
Re: Sea Bass Teasers
awsome stuff!!!!!! might catch a few cod on them also.;)
|
Re: Sea Bass Teasers
Awesome teasers! Jig 'em up!
Ben |
Re: Sea Bass Teasers
I used these teasers yesterday along with a hammered diamond jig and banged the large sea bass.
Nice job tying these Leifer. Thank you!! |
Re: Sea Bass Teasers
That came out awesome
|
Re: Sea Bass Teasers
Those look good Leif. Where do you get your threads from? The ones I get aren't stiff enough and my teasers tend to flop around a lot more than I like em too.
|
Re: Sea Bass Teasers
Quote:
Leif |
Re: Sea Bass Teasers
Quote:
|
| All times are GMT -4. The time now is 10:35 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.