NJFishing.com Your Best Online Source for Fishing Information in New Jersey

NJFishing.com Your Best Online Source for Fishing Information in New Jersey (https://www.njfishing.com/forums/index.php)
-   NJFishing.com Boating (https://www.njfishing.com/forums/forumdisplay.php?f=11)
-   -   Tide Eliminators (https://www.njfishing.com/forums/showthread.php?t=86693)

Man Workin 03-01-2016 11:12 AM

Tide Eliminators
 
I was going to use tide eliminators this year with the floating dock. Anyone have any positive or negatives about this product. Good price and seems like they work well.

Gerry Zagorski 03-01-2016 03:46 PM

Re: Tide Eliminators
 
Looks like a good product... I've also seen guys make them out of 2 inch PVC..
They cut the pipe down in 3 inch pieces, snake a line though them and tie it around the piling. Only problem is they do not float.

Irish Jigger 03-01-2016 05:21 PM

Re: Tide Eliminators
 
I use tide minders on my 26 century and they work like a charm. For the larger pilings like in Atlantic you need 3 sets to complete the ring around the piling. The only negative is if the boats next to you have lines low on the pilings. Was never an issue until a storm surge. Overall they are great and you rarely need to check your lines!!

Irish Jigger 03-01-2016 05:22 PM

Re: Tide Eliminators
 
http://www.tideminders.com/

Man Workin 03-01-2016 06:10 PM

Re: Tide Eliminators
 
TY

Man Workin 03-02-2016 12:44 PM

Re: Tide Eliminators
 
Irish, do you need to by three sets to go around one pilling? So 150 a side?
Brian

Irish Jigger 03-02-2016 12:53 PM

Re: Tide Eliminators
 
No the 3 sets will be for both pilings depending on the piling size. They come in sets of 9, I have 12 on one side and 12 on the other. Another bonus is they float and are easily hung on a nail when you leave the dock. I only have the 2 stern lines going to the the pilings with the balls and 2 bow lines and I don't move at all. They work great!!

Man Workin 03-02-2016 02:59 PM

Re: Tide Eliminators
 
I see what your saying, that will be cheaper to.

Abrasion 03-10-2016 08:58 AM

Re: Tide Eliminators
 
Can someone help me with the rigging using tideminders?

Im putting the boat into a slip this year. Dock is fixed.

My plan was to just put tideminders on all 4 pilings. No line crossing nothing fancy.

port bow to port piling
starboard bow to starboard bow piling
starboard stern to starboard stern piling
port stern to port stern piling

All 4 will have tide minders. Thoughts?



Does that make sense or should I be looking to rig another way

Capt. Debbie 03-10-2016 11:16 AM

Re: Tide Eliminators
 
I'm not saying good or bad. But one big sinking cause and salvage is the boat getting stuck under the fixed dock in a storm surge high tide situation.

Whatever you decide just keep that possibility in mind. That under dock hang up sinks many boats left in in the fall months .




Quote:

Originally Posted by Abrasion (Post 438005)
Can someone help me with the rigging using tideminders?

Im putting the boat into a slip this year. Dock is fixed.

My plan was to just put tideminders on all 4 pilings. No line crossing nothing fancy.

port bow to port piling
starboard bow to starboard bow piling
starboard stern to starboard stern piling
port stern to port stern piling

All 4 will have tide minders. Thoughts?



Does that make sense or should I be looking to rig another way


Irish Jigger 03-11-2016 12:37 PM

Re: Tide Eliminators
 
Capt Frank is right that could be a sketchy situation with even a moon tide. Just go with a simple counter weight system. It's cheap, safe and easily adjustable!!

Fluka Brasi 03-11-2016 10:30 PM

Re: Tide Eliminators
 
1 Attachment(s)
Get 4 of these (2" pvc conduit elbows) and glue them up. They make a perfect floating piling ring. Stronger than you think. On my 4th year with the ones I made, including Sandy.

Capt. Debbie 03-14-2016 01:15 PM

Re: Tide Eliminators
 
You need them to float Fill with the PVC with spray in insulation to improve this design

We had these floating large collars on our boats at Sandy Hook Bay Marina. The collars were dropped over the piles. They worked great in season. Had to get them out of water up high if it froze there.

Idea design is these floating collars on the forward cleats and pulleyed dumbbells on the stern to hold position in the slip.



Quote:

Originally Posted by Fluka Brasi (Post 438165)
Get 4 of these (2" pvc conduit elbows) and glue them up. They make a perfect floating piling ring. Stronger than you think. On my 4th year with the ones I made, including Sandy.



All times are GMT -4. The time now is 11:53 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.