![]() |
Broken knot
The last few trips I've broken off a couple of very nice fish. Both times recently the "perfection loop " at the top of the snelled hook has broken. What other knots are out there that have more strength and can be prefabbed and ready to go when needed. Typically I tie a dozen rigs prior to going fishing. Any thoughts?
|
Re: Broken knot
Quote:
And are you really wetting the knot before you cinch it down ? Loosen the drag a little after you move the fish out of the piece |
Re: Broken knot
Hey Dan, I'm using 50lb flouro on my snelled rigs with 65
Lb power pro and 50 lb topshot. I have the drag set for about 20 lbs or so If I remember. Broke them off while they were pulling drag, right at the perfection loop, 2x. A little frustrating to say the least. Maybe my knot wasn't tied properly IDK. I do get some spit on the knot while tieing them. Bad luck I guess. Not many other knot options out for a snelled rig I guess. |
Re: Broken knot
Is the perfection loop on the hook end or the main line connection?
|
Re: Broken knot
I connect to the mainline topshot which is doubled up
|
Re: Broken knot
Quote:
|
Re: Broken knot
Everybody is using fluoro these days, and it is supposed to have much better knot strength.. I am ultra careful with knots and very carefully wet and draw them tight.. After having a bunch of big fish break knots with fluoro, I switched back to mono.. Its wasn't cheap fluoro either it was Seaguar... It did not work as well as mono as far as "knotability", at least not for me...bob
|
Re: Broken knot
Quote:
|
Re: Broken knot
Use 80 for your snells. Perfection loops is about 40% line strength. Surgeon's loop knot is near 100%.
|
Re: Broken knot
When I'm doing rigs at home I use a drop of corn or canola oil in lieu of saliva when cinching. I think it helps for better knot.
|
Re: Broken knot
Thanks for all the replies. Gonna change from the perfection to the surgeons loop. Reports to follow.
|
| All times are GMT -4. The time now is 07:48 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.