blackfish rigs

[bassnbucks]

What type of rig do you sharpies use for blackfish. Hooks,lb. leader, swivel,etc....
thanks

[codbuster]

I tie a snelled hook at about 7
inches from the
swivel then another hook about 5 inches from the end of the leader !! 60 lbs leader material usually! Hope I explained that correctly!

[codbuster]

Forgot to mention that I'm noooooo sharpie!!

[loosescrews]

I'm no sharpie but caught quite a few. Prefer a single 3/0 gami on 40lb

[007Hookem]

Barrel swivel from braid to 3' -#40 fluorocarbon leader with a surgeons loop for sinker. 6-8" above surgeons loop I tie a dropper loop. Off the loop I use 8"-10" -#50 mono with a 3/0 gami or diiachi octopus hook. Im no sharpie but it's worked pretty well for me. The less hardware on your rig the better.

[bassnbucks]

thanks for the replys. 007 I rig like you do. My buddies have been using weight @ surgeons loop, then 2 hooks 8" apart above the sinker.Both work about the same.

[hookset]

I'm not a sharpie either but I snell one hook to the end of #50 leader pull off about 9 inches of line then tie a perfection loop, after that pull another 12 inches or so of leader and snell a second hook attach this to you top shot at the perfection loop! Hope that helps..

[Bobby Kojak]

Iam no sharpie either, but I have been fishing for blackfish for a lot of years. First, snell a 3.0 mustad beaked hook onto about a 18 in. florcarbon leader. Next tie about 10' of 40 lb. leader material to 65 lb power pro main line using a double uni-knot. At the end of the leader tie a 6"-8" loop. Half way up this loop, tie on your snell hook. The loop is for your sinker. Before you tie on your snelled hook, slide a second hook down to the snelled hook. This is called a slider hook rig. You have to keep your rigs simple. No metal except for the hook and sinker. No swivels, snaps jigs, etc. This rig always worked for me, and I hope it works for you.

Bobby Kojak

P.S. You might want to fish on the Ocean Explorer out of Belmar. A great boat, Captain and Mates..........

[Inishmore3]

Private message sent

[007Hookem]

Its a secret rig.

[PALMERS TACKLE]

Check out my website you will find three versions of the rigs --used by some of the best tog captains and fisherman in our area ..famous belmar captains rigs

[Super]

Helpful to know if you're fishing the jetty or from a boat. Rigs are different.

[sportfishingusa]

SLIDER HOOK!!!!!!!!!

[PeteyHD]

No swivels. No slider hooks. All that extra crap is just more stuff for the divers to clean house on in the wrecks. I use 60lb power pro with a 40lb top shot tied with an Albright knot. Top shot is about 2x the length of my 8ft rod and 3-4 cranks around the reel. Tie a loop at the end of the top shot for sinker and a few inches up attach my snelled size 3 Virginia hooks. No dropper loops no double hooks. Just a simple single hook rig works every time. (When the fish want to chew that is)

[mopie 25]

Last year I used a wind on leaders [by basil or jak ass. found him on ebay] tie a spider hitch and do a loop to loop connection they come in 25 feet. I use 40 lbs test easy to work with [the advantage I have found if you brake off or chafe the line it is easy and fast to rerig you have 25 ft of leader] , snell a 3/0 hook and tie a loop for the sinker and tie the leader from the hook 3 or 4 inches up from the sinker. there are many ways to use the hook set add a slider hook or use a snafu rig. By the way some days I am a sharpie and some days I am novice depends on the tog

[NautiDawg]

Great tips!

[Dupes]

Iam no sharpie either, but I have been fishing for blackfish for a lot of years. First, snell a 3.0 mustad beaked hook onto about a 18 in. florcarbon leader. Next tie about 10' of 40 lb. leader material to 65 lb power pro main line using a double uni-knot. At the end of the leader tie a 6"-8" loop. Half way up this loop, tie on your snell hook. The loop is for your sinker. Before you tie on your snelled hook, slide a second hook down to the snelled hook. This is called a slider hook rig. You have to keep your rigs simple. No metal except for the hook and sinker. No swivels, snaps jigs, etc. This rig always worked for me, and I hope it works for you.

Bobby Kojak

P.S. You might want to fish on the Ocean Explorer out of Belmar. A great boat, Captain and Mates..........

Maybe you're not a sharpie but I've seen you imitate one a few times.

[Reelron]

What Kurtis said!

[Togman316]

Keep it simple. No swivels. 65lb braid tied to 50 or 60 leader with no name knot. Use snafu for fishing whole baits or single rig for half baits. I don't like the slider rig because that sliding hook will damage and weaken your leader.

[Gerry Zagorski]

I'm definately on the side of no additional hardware. More to loose, more to get snagged and no real benefit to swivels or sinker slider or snaps.

Join your braided line to your top shot using a Uni to Uni or Alberto knot. I prefer the Albeto knot... Easier to tie and it has a lower profile than the uni so it goes through the rod eyes easier https://www.youtube.com/watch?v=J56O3CZVu7M

Take the last foot or so of your top shot and double it with a double overhand knot at the top. Put your sinker on that loop.

Make a loop 4 inches or so above your sinker and attached your pre snelled hook with a pre tied loop on to it to that loop. Now take your sinker and the line coming out of it and tie a double overhand knot around your hook loop to keep it in place.

This makes it very easy to re tie rigs when you eventually get snagged and break off.

I like using as stiff leader as possible for the hook leader since it helps keep the hook line away from your main line and tangling back up on it.

[PeteyHD]

Could not have said it better myself.

I'm definately on the side of no additional hardware. More to loose, more to get snagged and no real benefit to swivels or sinker slider or snaps.

Join your braided line to your top shot using a Uni to Uni or Alberto knot. I prefer the Albeto knot... Easier to tie and it has a lower profile than the uni so it goes through the rod eyes easier https://www.youtube.com/watch?v=J56O3CZVu7M

Take the last foot or so of your top shot and double it with a double overhand knot at the top. Put your sinker on that loop.

Make a loop 4 inches or so above your sinker and attached your pre snelled hook with a pre tied loop on to it to that loop. Now take your sinker and the line coming out of it and tie a double overhand knot around your hook loop to keep it in place.

This makes it very easy to re tie rigs when you eventually get snagged and break off.

I like using as stiff leader as possible for the hook leader since it helps keep the hook line away from your main line and tangling back up on it.