PDA

View Full Version : Cast control cap


stripedbass
10-19-2012, 09:33 PM
Does anyone know where I can get a cast control cap for a trinidad 14 a.

dfish28
10-19-2012, 09:43 PM
Sorry I don't ... But what does that do anyway... ?
Don't say it controls the cast

stripedbass
10-19-2012, 09:46 PM
Tenision on the spool.

Pete
10-19-2012, 10:55 PM
You can try www.mikesreelrepair.com They are in Canada, I've purchased parts from them before. The shipping wasn't too bad, not great either. I guess if he has the part, and you need it bad enough............. oh well.

Hope this helps, good luck!

dfish28
10-19-2012, 11:46 PM
Tenision on the spool.

So.... Drag nut

shrimpman steve
10-20-2012, 12:15 AM
why not order one right from shimano?

shrimpman steve
10-20-2012, 12:18 AM
So.... Drag nut

not a drag nut.

it controls the amount of free spool on a baitcasting reel. (if it's the piece i am thinking of). tighten it up and you have less free spool. loosen it for more free spool, one way to control backlashes if you are not good with your thumb. Loosen it too much and you are lookin to buy a new one:eek: :D

mickrazz
10-20-2012, 12:36 AM
It also adjusts the side play of the spool shaft into the bearings. Rule of thumb is "no play no load". If its to tight the bearings will wear prematurely, if its to loose the spool will be sloppy.

Dfish, you should start reading the owners manual when you buy a reel.

stripedbass
10-20-2012, 09:31 AM
why not order one right from shimano?

I wanted the reel for this weekend but if i can't find it I will order it from shimano.

stripedbass
10-20-2012, 05:49 PM
Found it thanks.