PDA

View Full Version : outboard alarm question


badfish88
01-29-2012, 07:48 PM
the boat i purchased is a 2001 angler EAGLE with a 2001 merc 125 saltwater 2+2

when i got the boat the audible engine alarm did not work, i dont even get the check alarm when i turn the key. On the honda 225's at work the speaker for the alarm is made into the ignition box on the console. i dont even know were to start on this one

badfish88
01-30-2012, 06:21 PM
No one?

shucker
01-30-2012, 10:13 PM
Should be in the same area,under dash.

badfish88
02-01-2012, 08:40 PM
thank you

Fish Stix
02-04-2012, 03:31 PM
Pretty sure its its own plug on whatever panel of guage its on. Probably either need a new guage or panel. Also make sure the plug is connected on the motor end too.

badfish88
02-06-2012, 08:29 PM
do you know if the alarms on the engine are tied into the main wireing harness

Fish Stix
02-06-2012, 10:28 PM
Theres usually one bundle of wires in splitting to a few different plugs back there. Just double check they are all plugged in, if so its probably the guage up front.