Captain Rich
07-06-2020, 01:16 PM
Always had a problem storing rods during layup, maybe this will help one of you guys.
4' wide sheet of plywood with 2x3 screwed to bottom, before attaching I took a foerstner bitt (1.35") and drilled butt holes 2 1/4" on center. Daiwa rod clips attached at the top. I have 24 rods racked here, take the reel off of every second or third rod. This can be double sided if you need the extra storage.
4' wide sheet of plywood with 2x3 screwed to bottom, before attaching I took a foerstner bitt (1.35") and drilled butt holes 2 1/4" on center. Daiwa rod clips attached at the top. I have 24 rods racked here, take the reel off of every second or third rod. This can be double sided if you need the extra storage.